FE 595 Plymouth Keypad Entry Schlage Keypad Entry Locks with the Flex-Lock feature allow the homeowners to choose whether their door remains locked (with a code or key required for entry) or unlocked (no code or key required for entry) simply by rotating the inside thumb turn. This added layer of protection ensures that valuables and family members are safe, and is ideal for garage entry doors, home offices, storage rooms and more. Some additional security and quality features include:
- Patented commercial grade clutching motor drive; tested to one million cylces
- Vandal resistant clutching lever design
- Code control; 6-digit programming code required to add and delete user codes.
- 2 pre-set unique 4-digit access codes, storage of up to 19 access codes.
- Warning code sounds after four incorrect codes are entered; keypad disabled for 30 seconds.
- Mechanical key override; patent pending
MANUFACTURER: Schlage
CATEGORY: Keyless Entry Locks
SUB CATEGORY: Plymouth Flex-Lock Keyed Entry
COLLECTION: Schlage FE Series / Electronic Keypad Entry
PRODUCT FAMILY: Plymouth
STYLE: Flair Lever Keypad Entry
INTERIOR: Thumbturn on interior.
EXTERIOR: ANSI/BHMA Commercial Grade 2.
5-Pin Solid Brass Key System.
1/2" Throw Deadlatch
FINISH: Aged Bronze - 716
FUNCTION: Keyed Entry / Typically used on side or back entry doors.
The Flex-Lock Keyed Entry is operated by a code or key on the exterior,
inside is always free (emergency egress).
WARRANTY: 3 Year Limited Electronics / Limited Lifetime Mechanical and Finish
SHIPPING WEIGHT: 5.05 lbs.
Helpful Hint: - This unit requires the same door preparation as a standard deadbolt.
- There is no hard wiring necessary as this unit operates on 1 - 9 volt battery included with purchase.
Please contact us with any questions @ 1-866-755-LOCK (5625). Flair Lever Trim with Flex-Lock Outer Trim: A - (Overall Height): 6.84 Inches
B - (Overall Width): 3.01 Inches
C - (Projection From Door): 3.24 Inches
Inner Trim: A - (Overall Height): 5.75 Inches
B - (Overall Width): 3.01 Inches
C - (Projection From Door): 3.27 Inches
DOOR PREP: Cross Bore: 2-1/8"
Edge Bore: 1"
Latch Face: 1" x 2-1/4"
BACKSET: Adjustable to 2-3/8" or 2-3/4"
DOOR THICKNESS: 1-3/8" to 1-3/4"
CYLINDER: 5-pin Solid Brass / Pin and Tumbler
LATCH FACEPLATE: 1" x 2-1/4" Round Corner
STRIKE PLATES: 1-5/8" x 2-1/4" Round Corner
LATCH BOLT: 1/2" Throw Deadlatch.
DOOR HANDING: Reversible for right or left hand doors.
ANSI/BHMA: ANSI/BHMA Commercial Grade 2.
ADA: N/A