The classic design of the Flair Lever is perfect for multi-family applications as well as applications where a classic look is desired.
Schlage Keypad Deadbolts bring professional grade security with the convenience of keyless access to the home. The innovative Turn-Lock feature allows the user to lock and leave without a key. Ideal for front, back and side entry doors where deadbolts are required. Some additional security and quality features include:
- Patented commercial grade clutching motor drive; tested to one million cycles.
- Vandal resistant free-spinning deadbolt turn.
- Code control; 6-digit programming code required to add and delete user codes.
- 2 pre-set unique 4-digit access codes, storage of up to 19 access codes.
- Warning code sounds after four incorrect codes are entered; keypad disabled for 30 seconds.
- Mechanical key override; patent pending
CATEGORY: Electronic Combo Packs
MANUFACTURER: Schlage
COLLECTION: BE Series
PRODUCT FAMILY: Camelot / Flair
INTERIOR: Easy Installation / Exposed Screws
PASSAGE: Passage Grade 2 certification
DEADBOLT: ANSI/BHMA Commercial Grade 2
FINISH: Satin Nickel - 619
FUNCTION: Electronic Deadbolt / Passage Lever (non-locking) below. Typically used on front or back doors.
Deadbolt is locked or unlocked by key or keypad outside or turn button inside.
HANDING: This set will work on either a right or left hand door application.
Reversible lever chassis (non-handed product).
WARRANTY: Manufacturer 3 year electronics / Limited lifetime mechanical and finish
SHIPPING WEIGHT: 6 lbs.
Helpful Hint:
- This unit requires the same door preparation as a standard keyed entry.
- There is no hard wiring necessary as this unit operates on 1 9V batteries included with purchase.
A (Base Diameter): 2.84" W x 4.15" H x 0.777" Depth
B (Lever Length): 4" (106mm)
C (Projection From Door): 2-23/32" (57mm)
BE365 Camelot Deadbolt

Outer Trim:
A - (Overall Height): 5.42 Inches
B - (Overall Width): 3.17 Inches
C - (Projection From Door): 2.18 Inches
Inner Trim:
A - (Overall Height): 5.66 Inches
B - (Overall Width): 3.28 Inches
C - (Projection From Door): 1.84 Inches
DOOR PREP: Cross Bore: Lever 2-1/8"
Edge Bore: 1"
Latch Face: 1" x 2-1/4"
BACKSET: Adjustable to 2-3/8" or 2-3/4"
DOOR THICKNESS: Standard 1-3/8" to 1-3/4"
KEYED CYLINDER: Pin & Tumbler / 5-Pin Solid Brass Key System / C Keyway
LATCH FACEPLATE: 1" x 2-1/4" Latch options include: round corner, square corner or drive-in.
STRIKE PLATES: Lever: 2-1/4" full lip Round Corner Strike.
STRIKE PLATES: Deadbolt: Round Corner 1-1/8" x 2-3/4"
LATCH BOLT: Lever: Plainlatch - 1/2" Throw.
LATCH BOLT: Deadbolt: Solid Zinc Bolt; Full 1" Throw.
DOOR HANDING: Reversible Lever Chasis. Will work on either right or left hand doors.
ANSI/BHMA: Lever: Grade 2 A156.2
ANSI/BHMA: ANSI/BHMA Commercial Grade 2
ADA: N/A
Please contact us with any questions @ 1-866-755-LOCK (5625).
Kwikset Warranty
Mechanical & Finish Coverage: Both are covered for as long as the original purchaser occupies the home where the product was installed.
Electronics Coverage: Electronic components are covered for 1 year from purchase.
Authorized Seller Requirement: Warranty applies only to products purchased from Kwikset-authorized sellers (like Door Locks Direct); unauthorized purchases are not eligible.
Exclusions: No coverage for misuse, improper installation, chemical damage, commercial use, modifications, or mixing Kwikset with non-Kwikset trim; warranty is non-transferable.
Claims Process: Proof of purchase and defect description required; Kwikset may provide troubleshooting or replace the product and supplies a prepaid return label if a return is authorized.
For more details please visit Kwikset.com
Schlage Warranty
Mechanical & Finish Coverage: Most Schlage residential products include a Limited Lifetime Mechanical and Finish Warranty.
Electronics Coverage: Smart and electronic products carry a 3-year electronics warranty.
Original User & Authorized Seller Requirement: Warranty applies only to the original residential user, is non-transferable, and requires purchase from a Schlage-authorized seller (like Door Locks Direct).
Exclusions: No coverage for labor, normal wear, improper installation, misuse, environmental damage, commercial/common-area use, or Oil-Rubbed Bronze finish changes.
Schlage Remedy: Upon inspection, Schlage may replace with new/remanufactured product or refund the purchase price; customer must return the product with proof of purchase.
For more details please visit Schlage.com
Your Bonus Benefit
Free Standard Keying
Available on all keyed locksets we sell - choose keyed alike or keyed different - or any combination that fits your needs - at no extra cost.
Learn More