Coordinates
Description
Commonwealth Lever
A (Base Diameter): 2-5/8"
B (Lever Length): 4-7/32"
C (Projection From Door): 2-7/16"
A (Base Diameter): 2-5/8"
B (Lever Length): 4-7/32"
C (Projection From Door): 2-7/16"
Commonwealth Dummy Lever
DOOR PREP: No holes in the door required for mounting.
This lever function screws to the face of the door (two wood screws provided).
BACKSET: N/A
DOOR THICKNESS: N/A
CYLINDER: N/A
LATCH FACEPLATE: N/A
STRIKE PLATES: N/A
LATCH BOLT: N/A
DOOR HANDING: This function is handed. This is a right handed lever and is not reversible.
See diagram below.
ANSI/BHMA: A156.2 Grade 2.
ADA: This function satisfies section 4.13.9 ADA requirements.
DOOR PREP: No holes in the door required for mounting.
This lever function screws to the face of the door (two wood screws provided).
BACKSET: N/A
DOOR THICKNESS: N/A
CYLINDER: N/A
LATCH FACEPLATE: N/A
STRIKE PLATES: N/A
LATCH BOLT: N/A
DOOR HANDING: This function is handed. This is a right handed lever and is not reversible.
See diagram below.
ANSI/BHMA: A156.2 Grade 2.
ADA: This function satisfies section 4.13.9 ADA requirements.